Do you use the electric pruning shears correctly?
The electric pruning shears are now an indispensable tool in garden tools. As the saying goes, sharpening a knife does not hurt the woodcutter. If you do not know the correct use of the electric pruning shears, it will cost a lot of effort, and even affect the service life of the electric pruning shears. Now let's take a look at the correct use of the electric pruning shears.
Methods/Steps
Do not cut branches that exceed the working range of the scissors, do not cut hard things such as metal, stone and other non plant materials, do not clamp tools with vises, and replace the scissors if they are worn or damaged
Keep the equipment clean. Use clean cloth to clean the electric pruning shears, batteries and chargers (do not use any corrosive or solvent based cleaners). Use a soft brush or dry cloth to clean the dust on the scissors head
Do not immerse the electric pruning shears, batteries and chargers in any liquid such as water
Please use the equipment correctly according to the instructions. Do not use the electric pruning shears, batteries and chargers when they are damaged
If the subscription switch cannot be turned on or off normally, do not use the electric pruning shears. The electric pruning shears that cannot be controlled by the switch are dangerous and need to be repaired
Ensure that the switch is turned off when making any adjustment, replacing accessories or storing the electric pruning shears. This protective measure will reduce the risk of accidental starting of the electric pruning shears
Please keep the idle electric pruning shears out of the reach of children with the blade closed, and do not let unfamiliar electric pruning shears or people who do not know the instructions to operate them. It is dangerous for untrained users to use them
When using electric pruning shears and accessories, observe the instructions and methods of use, and consider the working environment and the work to be completed. Using electric pruning shears as operations that do not meet the requirements may lead to hazards
nine
After use, remove the dirt from the moving blade and stationary blade, and then apply lubricating oil or oil on the contact part to keep the blade in normal maintenance. The next use will reduce the resistance and extend the life of the blade.